Rods, Bases, Stands & Tripods_

A range of stands and rods are manufactured in various materials and finishes and are designed to cope with the demands of a modern laboratory.

Make Enquiry
  • SPREAD BASES

    Manufactured in cast iron and painted acrylic blue, with central rod hole tapped 10 mm fitted with rubber feet.

    Specification

    Equipment Catalogue Number Rod Centre / Foot Centre Weight
    Spread Base 3025 - Discontinued
    Spread Base 3025/2 100 mm 1.25 Kg
    Spread Base 3052/3 135 mm 1.55 Kg
    Spread Base 3052/4 175 mm 2.5 Kg
  • A SHAPE

    Manufactured in cast iron, resting on 3 feet. Clear rod hole 13 mm diameter to accept 3109 series rods with plastic headed screw, painted acrylic blue. Dimensions: Leg length 200 mm, Width between legs 160 mm, Weight: 2.5 Kg

    Specification

    Equipment Catalogue Number Dimensions Miscellaneous
    A Shape Stand 3026/M Leg length 200 mm
    Width legs 160 mm
    Weight: 2.5 Kg
    -
  • H SHAPE

    Manufactured in cast iron and painted acrylic blue for use with stirrers etc. For use with 18 mm diameter nickel-plated steel rod 700 mm length - 3019/1. Other lengths can be supplied on request. Dimensions: Leg length 270 mm, Front Opening: 245 mm, Weight: 5.5 Kg.

    Specification

    Equipment Catalogue Number DimensionsMiscellaneous
    H Shape Stand 3019 Leg length 270 mm
    Front Opening: 245 mm
    Weight: 5.5 Kg
    -
  • RETORT BASES

    4 sizes of base are manufactured in steel. The bases have 10 mm tapped bush pressed in to them to take the 3108 series rods. All bases are fitted with rubber feet.

    2 colours in 3 finishes are standard as listed below. Standard type A base has the hole in centre of short side, type B - hole in centre of long side and type C - hole in centre of base.

    Specification

    Equipment Catalogue Number Base Size Weight
    Blue Acrylic Base 3107/1 160mm x 100mm 0.75kg
    Blue Acrylic Base 3107/2 200mm x 125mm 1.25kg
    Blue Acrylic Base 3107/3 250mm x 160mm 2.0kg
    Blue Acrylic Base 3107/4 315mm x 200mm 3.0kg
    White Acrylic Base 3107/11 160mm x 100mm 0.75kg
    White Acrylic Base 3107/21 200mm x 125mm 1.25kg
    White Acrylic Base 3107/31 250mm x 160mm 2.0kg
    White Acrylic Base 3107/41 315mm x 200mm 3.0kg
    White Vitreous Enamel Base 3107/12 160mm x 100mm 0.75kg
    White Vitreous Enamel Base 3107/22 200mm x 125mm 1.25kg
    White Vitreous Enamel Base 3107/32 250mm x 160mm 2.0kg
    White Vitreous Enamel Base 3107/42 315mm x 200mm 3.0kg
  • RODS

    4 standard sizes of rod are manufactured all threaded 10 mm produced in mild steel, zinc plated steel, aluminium and stainless steel.

    Specification

    Equipment Catalogue Number Rod Length Rod Diameter
    Mild Steel Rod 3108/1 500 mmm 10 mm
    Mild Steel Rod 3108/2 600 mm 12.5 mm
    Mild Steel Rod 3108/3 750 mm 12.5 mm
    Mild Steel Rod 3108/4 1000 mm 12.5 mm
    Zinc Plated Steel 3108/11 500 mmm 10 mm
    Zinc Plated Steel 3108/21 600 mm 12.5 mm
    Zinc Plated Steel 3108/31 750 mm 12.5 mm
    Zinc Plated Steel 3108/41 1000 mm 12.5 mm
    Aluminium 3108/12 500 mmm 12.5mm
    Aluminium 3108/22 600 mm 12.5 mm
    Aluminium 3108/32 750 mm 12.5 mm
    Aluminium 3108/42 1000 mm 12.5 mm
    Stainless Steel 3108/13 500 mmm 10 mm
    Stainless Steel 3108/23 600 mm 12.5 mm
    Stainless Steel 3108/33 750 mm 12.5 mm
    Stainless Steel 3108/43 1000 mm 12.5 mm
  • CIRCULAR TRIPOD

    Manufactured in zinc plated steel with the legs 6 mm diameter. These are riveted in place and bent outwards for stability.

    Specification

    Equipment Catalogue Number Height Outside DiameterInside Diameter
    Circular Tripod 3000 210 mm 125 mm110 mm
    Circular Tripod 3004 210 mm 150 mm135 mm
  • TRIANGULAR TRIPOD

    Manufactured in zinc plated steel with the legs 6 mm diameter. These are riveted in place and bent outwards for stability.

    Specification

    Equipment Catalogue Number HeightLength Of Side
    Triangular Tripod 3001 210 mm 125 mm
    Triangular Tripod 3002 210 mm 150 mm
    Triangular Tripod 3003 210 mm 200 mm
  • STAINLESS STEEL TRIPOD

    Manufactured in 5 mm stainless steel and fitted with plastic feet.

    Specification

    Equipment Catalogue Number HeightLength Of Side
    Triangular Tripod 3001/1 210 mm125 mm
    Triangular Tripod 3001/1S 150 mm125 mm
  • RINGS

    Constructed in mild steel with welded joints. Where a bosshead is fitted it is in alloy, diecast on to the ring stem and fitted with a blue plastic headed nickel plated steel screw. All rings and plates are zinc plated.

    Rings with plain stem 8 mm diameter by 140 mm long, for use with separate bossheads.

    RING SIZE

    Rings 12345681112141517
    Internal diameter mm 38 506269755682100106125131150
    Centre to Centre 2013 85 90959510095103110110125128135
  • RINGS - WITH BOSSHEAD ECCENTRIC SERIES

    These rings have a standard stem length with various ring diameters. The stem length to the centre of the bosshead is approximately 60 mm.

    Specification

    Equipment Catalogue Number DiameterMiscellaneous
    Rings - With Bosshead Eccentric Series 2013 -The stem length to the centre of the bosshead is approximately 60 mm
    Rings - Cut Out 2014 -As number 2013 but with cut out section to allow easy removal of equipment.
    Rings - Cut Out 2015 -As number 2014 but the ring is rubber covered.
  • BENCH MOUNTED Cylinder Holder

    Designed to support gas cylinders up to 300 mm diameter. Heavy-duty alloy casting secured to benches up to 70 mm thick with two plated steel tommy screws. Two countersunk holes are provided to accept wood screws for permanent fixing, complete with fire resistant belt and buckle. Belt breaking strain 750 kg. Stitching 500 kg. Buckle British Aerospace specification.

    Specification

    Equipment Catalogue Number Capacity Miscellaneous
    Bench Mounted 3603 up to 300 mm diameter -
  • WALL MOUNTED Cylinder Holder

    Comprising of a curved nylon coated steel bracket with a plated chain to hold cylinder firmly in position. For use with cylinders up to 230 mm diameter.

    Specification

    Equipment Catalogue Number Capacity Miscellaneous
    Wall Mounted 9501 up to 230 mm diameter -
  • CYLINDER STANDS

    Constructed in nylon coated steel. The stands are manufactured in two sizes to take cylinders of 146 mm and 178 mm diameter.

    Specification

    Equipment Catalogue Number Capacity Miscellaneous
    Cylinder Stand 3604 146 mm -
    Cylinder Stand 3605 178 mm -

INDUSTRIES_

  • Medical

    We manufacture a variety of components for anaesthetic equipment, operating equipment & developing new products with customers.

  • Power Generation

    Manufactured components from special materials for use in power stations.

  • Pump Manufacturers

    We manufacture a wide  variety of components used in the control & flow of fluids & gases.

  • Leisure

    We work for companies who manufacture children's playground equipment and have helped them with their products from concept through to batch production.

  • Packaging & Labelling

    We work for a variety of companies manufacturing parts for the food & packaging industry  eg Bottling machinery/ canning machinery/ labelling machines.

  • Security

    We have been manufacturing components for the fire & security industry for the past 10 years , where component  tolerances are quite literally life and safety critical.

  • Telecommunications

    From prototypes to large batch production we can provide a rapid and flexible manufacturing service with no compromise on precision, quality and delivery.

  • Introduction

    We have over 60 years experience in producing the highest quality instrumentation where quality and reliability are quite literally critical for a wide range of sectors.

Accreditations_

R & L Enterprises Ltd is a privately owned company established in 1942 and operated by the present ownership since 1964. The existing facility covers 2000 square metres with a further 2000 sq m available for expansion.